Cost of the Artwork
Atelier Menuiserie Delaporte
1 zone artisanale
37500 Candes Saint-Martin France
RCS Tours – 483 055 307 00019 APE 5030Z
A) Raw materials :
– Plywood 15 mm
– Jura wood
– Screws, bolts, glue, etc…
– 10 transport cases on wheels for the exhibition tours of the artwork
B) Labor :
– Armature and assembly
– Polishing, other …
Production of the work of 12 Linear Meters x 6 ML x 2.60 ML fully removable.
1.20 ML x 2.5 ML panels fixed on the ground on a solid wood belt.
On the ceiling, a 170 milimeter x 0.60 ML joist covered with poplar plywood.
The exterior panels and partitions are made of 15 mm poplar plywood on a 60 x 80 mm fir framework. The panels are hung on the walls and partitions by metal brackets.
There will be two invisible doors at each end, on the two smaller sides opposite the rectangle formed by the wooden structure.
The materials are provided without treatment (varnish, oils etc.), because the treatment of materials will be subject to an additional estimate (raw materials and labor), according to the standards to be respected following the remarks of the firefighters from the security service.
This estimate, dated June 2018, was based on the various exchanges and knowledge of the project between Régis Granville and Louis Delaporte.
Manufacture and design of the creation of the work and transport crates for exhibitions to the general public according to the plan and sketch of the project.
Construction of the artwork under the direction of Régis Granville - visual artist in collaboration with Louis Delaporte - carpenter.